Where to Place Knobs on a Cabinet

Once you decide to change out cabinet hardware you might find the style you pick won't look that great if you try and replace the knobs in the same spots that the old ones were in. Well what to do? You certainly don't want to go back to the same boring old hardware. Instead you need a better understanding of your options for where to place knobs on a cabinet.

Where to Place Knobs on a Cabinet

Where to Place Knobs on a Cabinet

---

Where to Place Knobs on a Cabinet

Where to Place Knobs on a Cabinet

The most obvious place to put a knob will be on a side opposite a hinge. The leverage allows you to open the door with almost no effort. This is great for those that might have a disability limiting their grip strength. The only exception to this rule is if you have roll out bottom cabinets, you know, the giant drawer types. Those you'll want to install the knobs centered on the cabinet to keep it from binding up on either side.

Well that gives you a rough idea of where to put the knobs but you probably need something a little bit more exact. Unfortunately there's no magic formula for where to place knobs on a cabinet. It's all going to come down to how the cabinets are designed and the size and shape of them and your kitchen.

There's a trick you can use to figure out where to place the knobs without just randomly drilling a bunch of holes into the cabinet face and hoping for the best. Head out to the hardware store and pick up a small tub of plumber's putty. Plumbers putty is a non-hardening compound that's slightly tacky. You can pull off little dollops of it then use it to just stick the knobs to the cabinet.

Here's what you'll do.

Open up the tub of Plumber's putty.

Pinch off a piece of putty about the size of the tip of your thumb.

Roll it into a ball.

Take the cabinet hardware and press the putty onto the back of it. Now you can just stick the knob onto the cabinet face wherever you think it will look right. Repeat this for a couple of the doors so you can get an overall feel for how the knobs will look sitting in a row. You can reposition the knobs just by popping them off the cabinet face and sticking them back on in a new spot.

Once you've figured out the right look for the cabinet you'll need to measure the knob offsets from the bottom and side edge of the cabinets. You can then use those measurements as a template for knob placement. Mark the offsets on each of the cabinets and double check to make sure they aren't slanting up or down.

The last thing to do is attach the hardware. Just drill the holes in the cabinet and slide a bolt through the hole and tighten the knobs down onto it. It's all a pretty simple job. Where to place knobs on a cabinet is a completely personal choice. You'll know what looks right once you get the knobs in position.

Where to Place Knobs on a Cabinet

Tools Required By Plumbers

The specialized skill of plumbing is a mandatory need of many residential home owners, these days, tomorrow and in the future. Many people go to trade schools and gain this skill so that they can develop into certified plumbers and start their own business someday.

Tools Required By Plumbers

Tools Required By Plumbers

---

Tools Required By Plumbers

Tools Required By Plumbers

Occasionally it may be challenging to find a local plumber. So there will be times wherever the homeowner will have to achieve the skill for themselves.

However, for a skilled or a novice plumber to carry out his plumbing work efficiently, he will need the correct and sufficient tools. Here you can learn the fundamental tools and supplies that is desired and used by a plumber.

A Caulk gun- this used to clutch tubes of caulk or glue. A steel handle pushes the bead of caulk out of the plunger.

A Flashlight- a flashlight will be required for plumbers to inspect pipes and drain openings.

A circuit tester- this is a very valuable device for testing for live current in an electrical outlet or appliance.

A ratchet wrench will be needed to tighten and loosen bolts and nuts

A hacksaw can be used for cutting metal and also plastic pipes.

A utility knife will in addition come in handy while doing a plumbing job. They have a razor sharp blade that is helpful on behalf of trimming the ends of plastic pipes.

A putty knife is helpful for scraping away old putty from appliances and fixtures.

Needle nose pliers will prove worthwhile for holding little objects and for getting into confined areas.

A Tubing cutter makes straight smooth cuts into plastic and copper pipes.

A closet auger is a slender tube used to clear toilet clogs. It has a crank handle on one end of a flexible auger cable. A bend in the tube allows the tube to achieve the base of the toilet and there is a rubber sleeve to prevent the toilet from getting scratched.

A hand auger is referred to as a snake and is used to clear clogs in drains. One more helpful tool is a blow bag. It is used to clear clogs in drains and is attached to garden hose to remove the clogs with powerful spurts of water.

For the most part and very common tool for plumbing work is a plunger. It removes clogs with water and air pressure. A standard plumber can be used to clear clogs in showers, sinks and floor drains. Nearly in all places you go you will see a plunger, even in restaurant bathrooms.

So to recap, these are merely a small amount of the tools required to effectively carry out a plumbing job at home. With the correct tools and correct methods, you can save yourself some money by doing plumbing on your own.

Tools Required By Plumbers